Form Factor |
|
24-pin |
48-pin |
70-pin |
112-pin |
128-pin |
Core |
|
| | | | |
Microcontroller Mfg |
|
Freescale |
Freescale |
STMicroelectronics |
Freescale |
Freescale |
Microcontroller Model |
|
HCS12 |
MPC555 or MPC563 |
- |
MPC5554 |
MPC565 |
Clock Frequency (MHz) |
|
24 |
40 or 56 |
80 Mhz |
80 |
56 |
Memory |
|
| | | | |
Internal Flash (kb) |
|
128 kb |
448 |
1.5 M |
2000 |
1000 |
Dev't Internal Flash (kb) |
|
- |
- |
- |
- |
- |
External Flash |
|
- |
- |
- |
- |
- |
EEPROM Serial (kb) |
|
2 kb |
4 or 16 |
16k |
32k (serial) |
8k (serial) opt. 128k (parallel) |
EEPROM Serial Optional (kb) |
|
0-8kb available |
8 available |
- |
- |
- |
Dev't EEPROM (kb) |
|
- |
128 |
- |
- |
- |
Internal SRAM |
|
2k |
26k or 32k |
- |
64k |
36k |
External SRAM |
|
- |
- |
- |
512k (dev't version only) |
512k (optional) |
Inputs |
|
| | | | |
Supply Voltage Low |
|
8 |
8 |
- |
8 |
9 |
Supply Voltage High |
|
16 |
16 or 32 |
- |
16 |
32 |
Emergency Stopped Inputs |
|
- |
1 available |
- |
1 |
- |
Switch Inputs |
|
4 switched to battery available |
- |
- |
- |
- |
Frequency Inputs |
|
- |
Up to 4 Hall-Type (PU) and/or up to 2 VR/Hall (Sw selectable) available |
- |
Up to 4 Hall-Type (PU) |
Up to 8 Hall-Type (PU) |
Motor / Pump Position Input Type |
|
VR/Hall Mode available (sw selectable) |
VR or Hall (model dependent) |
- |
Both VR and Hall Input Pins Available |
VR/Hall (sw selectable) |
Analog Inputs (10-bit) Low |
|
6 or 7 |
12 to 19 see specific data sheets |
- |
33 |
34 |
Analog Inputs (10-bit) High |
|
6 or 12 |
12 to 19 see specific data sheets |
- |
33 |
34 |
O2 Sensor Inputs |
|
1 single-ended EGO (opt) available |
3 Single Wire EGO (opt) available |
- |
4 differential EGO |
2 UEGO (Bosch wide-range); 2 differential EGO (opt); 2 single-wire EGO |
Outputs |
|
| | | | |
High Current Drivers (6A+) |
|
- |
1 or 2 low-side (PWM) |
- |
- |
- |
Medium Current Drivers (2-5A) |
|
1-4 low-side available |
Various combination of low-side PWM, low-side discrete and high-side discrete |
- |
4 low-side (w/HEGO diagnostics) |
10 low-side PWM (2 w/current sense) |
Current-Controlled Drivers |
|
5 low-side available |
- |
- |
2 (1A) |
- |
Low-Current Drivers (500mA) |
|
1 low-side available |
1 low-side PWM |
- |
5 low-side |
1 |
Relay Drivers (<250 mA) |
|
- |
- |
- |
- |
- |
Main Power Relay Low-Side Driver |
|
- |
1 |
- |
1 |
1 |
Low Side Drivers |
|
1-4 High Impedance available |
4 (High Impedance) available |
- |
8 (High Impedance) |
12-3A/1A Peak Hold (6 are 7A/2.5A SW Select) |
Logic Outputs or High Side Drivers |
|
0 or 3 (5V) Triggers available |
up to 4 (5V) and 1 (12V) available |
- |
8 (5V) Triggers, 1 (12V) |
12 or 16 (5A triggers) 1 (12V) |
Low-Current H-Bridge Driver |
|
0 or 1 (5A w/current sense) available |
1 or 2 (5A w/ current sense available) |
- |
1 (5A w/current sense) |
- |
High-Current H-Bridge Driver |
|
- |
1 (15A w/ current sense available) |
- |
1 (12A Discrete) |
3 (15A w/current sense) |
Sensor Excitation |
|
1 (5V) Sensor Supply 250mA max |
1 0r 2 (5V) Sensor Supply 350mA max OR 1 (5V) Sensor Supply 300mA max |
- |
2 (5V) Sensor Supplies (50mA and 100mA) |
2 (5V) Sensor Supplies (350mA max) |
Communications |
|
| | | | |
CAN 2.0B |
|
1 or 2 |
1 to 3 available |
- |
3 |
2 |
USB1.1 |
|
- |
- |
- |
- |
- |
Serial |
|
- |
RS-485 (opt) available |
- |
RS-485 (opt) |
RS-485 (opt) |
Shutdown |
|
varies btw SW control and Not SW Controlled |
SW Controlled (via MPRD relay) |
- |
SW Controlled |
SW Controlled |
Environmental |
|
| | | | |
Operating Temperature (deg C) Range - Low |
|
-40 |
-40 |
- |
-40 |
-40 |
Operating Temperature (deg C) Range - High |
|
105 |
85 or 105 depending on selected controller |
- |
105 |
105 |
Construction |
|
Plastic Housing |
Stamped Aluminum |
- |
Cast Aluminum w/ E-coat |
Cast Aluminum |
Connector |
|
24 Pin Delphi |
48 Pin Tyco |
- |
112 Pin Molex |
80 and 48 Pin Tyco |
|
|
Learn More
|
Learn More
|
Learn More
|
Learn More
|
Learn More
|